5 Top Tips For Maximizing Your Next DIY Microdermabrasion Kit
Smooth, glowing, blemish-free skin is everyone’s dream. Unfortunately, only a few people possess this rare, almost perfect skin.
The rest of the population are annoyed by those despicable skin problems of all sorts, such as acne, dull skin, sun-damaged skin, enlarged pores, blackheads and whiteheads, fine lines, stretch marks and many more.
For example, research findings reveal that 85% of individuals between the ages 12 to 24 experience at least mild acne at this point of their lives.
Acne is a common skin problem of the majority of the population. It may start as a breakout of blackheads and whiteheads, pimples, and tiny cysts. These usually appearing on the face, and neck, and sometimes, on the upper and middle portion of your back.
There are different causes of acne. It could be hereditary, emotional stress, pollutants, other health problems or hormonal change.
Whether you’re suffering from acne or other skin problems that are really hard to deal with, you don’t need to despair. Even though skin problems could cause anxiety, depression, low self-esteem and stress, do not give up.
THERE IS A SOLUTION.
The answer to your problem is just a click away. It will arrive on your doorstep, and right in front of you will be the long-awaited wish.
DIY microdermabrasion at home is all you need
You can definitely win the battle against these common skin care problems through microdermabrasion.
Perhaps, microdermabrasion is not new to you. You may have heard about it a few times before. However, you may not be totally familiar with it, how the process goes and what benefits it could give your skin once you are regularly undergoing the treatment.
Well, these things are what we will be talking about this time. We are going to discuss how you can possibly achieve great results after a DIY microdermabrasion.
Microdermabrasion is a skincare process that uses tiny crystals applied and scrubbed on the skin’s surface by a hand-held applicator or wand.
These tiny crystals act as the main component for the abrasion process. Microdermabrasion exfoliates skin, and the machine used for the process sucks all the dead skin cells scraped along with the micro crystals used for abrasion.
Most dermatology clinics and salons offer this skincare service. With just a few sessions, results can be visible.
Microdermabrasion is good for your skin because regular exfoliation gets rid of the outermost skin’s unhealthy cells.
As a result, it reveals newer, healthier, and more vibrant skin. However, there might be some reasons why you can’t possibly arrange a schedule for a regular microdermabrasion session. Thus, you’ll likely prefer at-home dermabrasion, a DIY skincare trend.
Why you should consider a microdermabrasion DIY kit
Although microdermabrasion has been tagged as the “lunch hour skincare treatment”, it may still take 30 to 60 minutes to complete a session if you go to a clinic.
Whereas a DIY dermabrasion could be as fast as five minutes.
Yes, it would hardly interfere with your busy schedule. You can include it in your usual skincare regimen without worrying that it will take so much time. Besides the fact that DIY dermabrasion at home could save you a lot of time, it could also save more money from your budget.
Microdermabrasion in clinics and salons usually costs around $75 to $300 per session.
On the other hand, the prices of microdermabrasion at home kits range from $15 to $200, depending on the brand, and what the package includes.
While every session with a dermatologist costs a hefty price, your own microdermabrasion machine may last for several years of use, depending on how you use it and care for it.
Keep in mind, though, that you should consult with a dermatologist before using any machine or product on your skin. Only a doctor can guarantee the safety of any procedure done on your complexion.
Just think of the consequences if you were unable to consult a doctor before using a cheap machine on your face. You might break out, have an allergic reaction or even get sent to the emergency room.
If you’ve already bought a device, make sure that you take it to your doctor first before you use it. Your dermatologist can tell you how to use the device, and even suggest what treatments you can have along with your at-home machine.
Make the most of the at home microdermabrasion DIY trend
Doing microdermabrasion at home is milder compared to the process done in clinics and salons, which are more aggressive in the abrasion process.
Most of the home-use machines are also safe, and if used correctly, these machines could potentially improve the appearance of your skin. This is if you follow exactly what’s on the manual and the tips most users suggest.
Before purchasing a microdermabrasion kit, make sure that you’re choosing the one that’s right--which is usually a complete package microdermabrasion kit.
Of course, in order to successfully do your own microdermabrasion in the comfort of your own home and achieve your desired results, you should purchase everything that will be needed in the treatment.
So what is usually included in a microdermabrasion kit? A complete package usually has the main microdermabrasion machine, several types of hand-held wands and tips, microdermabrasion filters, and skincare products such as toner, cleanser and moisturizer.
As promised, the top five tips in maximizing your microdermabrasion kit have been rounded up. Check the following guides for your microdermabrasion machine, and make the most out of each treatment.
5 Top Tips for Maximizing your Microdermabrasion Kit
1. Choose the right speed setting for your skin.
Usually, a DIY microdermabrasion machine has four levels of speed settings.
Levels 1 and 2 which are the milder speed settings are advisable for individuals who have sensitive skin. Levels 3 and 4 are designed for a more aggressive treatment. However, even if your skin is not sensitive, it is better to start with the lowest setting.
Starting with the most basic, mildest level will enable you to condition your skin, gradually preparing it for a more aggressive exfoliation.
Slowly work your way to increase the speed setting to higher levels, as if you are working your way up the staircase.
Another useful tip discovered by most microdermabrasion kit users is to use milder levels on the most sensitive facial areas, such as the skin around the eyes.
The low setting must also be applied on the neck. On the other hand, it is good to use a higher setting on the skin areas on your chin, forehead, and cheeks. Focus on the spots where more work is needed, rather than the areas that are already flawless.
Since no two individuals are exactly alike, so is our skin. Therefore, you need to personally find out what setting works for you.
Bonus tip: Always do the upward motion in treating your skin with microdermabrasion. Downward motion could cause fine lines and wrinkles, while upward motion keeps the skin tighter.
2. The best time to do your microdermabrasion session is after shower.
Now you might be wondering what would be the best time to use a diy microdermabrasion machine, if it must be before or after shower. Experts and seasoned users sometimes disagree.
But what does the majority say?
Well, most users suggest that you do it after shower. According to them, it’s the best time that works and can maintain your skin better.
Actually, before abrading your skin and getting rid of those dead skin cells on your epidermis, you need to thoroughly wash your face. That’s the first part of the basic full microdermabrasion process.
So, if you do your exfoliation treatment after shower, basically, your skin will be washed and rinsed thoroughly. At that point, your skin is all set for the treatment.
Some individuals say that they don’t need to put on lotion or serums after the treatment.
However, if your skin feels a bit dry, it is suggested that you apply an oil-free lotion or any good moisturizer to help your skin recover faster.
Majority of the individuals who use a microdermabrasion machine say that applying a daily moisturizer really helps.
You must remember to always rid your skin of crystals and residue thoroughly every after microdermabrasion treatment. Use a damp cloth and wipe gently and slowly.
Make sure to remove all the abrasive particles from your face to avoid them from getting into your eyes, as not all the crystals and dead skin cells may not be sucked by the machine.
3. Treat yourself 2 to 3 times every week.
The instructions on how frequent your DIY treatment session should be might actually depend on the microdermabrasion at home products you’ll be purchasing. Nevertheless, the usually-advised frequency of a treatment session should be 2 to 3 times per week.
Microdermabrasion should be done every week on a regular basis to easily and fully achieve the desired results.
In some cases, it is advised to do the treatment every 6 to 7 days at the very first stage of using a DIY microdermabrasion scrub. As you start to notice and experience improvement in your skin’s texture, tone, and appearance, you can decrease the frequency little by little. You can then do the treatment you had at the beginning from every 6 to 7 days to 2 to 3 days per week.
Also, it is usually best to do the microdermabrasion treatment session on weekends, so that your skin will have enough time to recover before you go back to work.
Remember, though, that microdermabrasion does not have downtime. But giving your skin more time to rest and recover offers the best results- healthy, tighter, clearer skin.
4. Use your microdermabrasion machine at home along with the right skincare products.
Microdermabrasion alone won’t give your skin the best appearance the latter can achieve. Exfoliation works best when you use other products that can treat the specific skin problems that you have.
For example, some people who want to get rid of acne scars have found out that using products that have salicylic acid which is the usual treatment administered for acne works well with every session.
For people with dry skin, intensive collagen or hyaluronic acid may be the right cream base.
Another product acne sufferers have found useful is something that has glycolic acid.
With consistent and continual use of your microdermabrasion at-home machine and these products, acne scars may fade out little by little, and your skin will feel smoother and more refreshed.
Once you have undergone a microdermabrasion treatment, it is important to keep your pores clear and unclog them as much as possible with a cleanser.
For those who have more sensitive skin, use a milder cleanser for your skin to avoid irritation. You must also regularly use a toner and moisturizer. If these items aren’t included in your kit, purchase them separately.
5. Thoroughly clean or replace some parts of the machine after a few uses.
The filter in your machine should be constantly replaced. This will enable your machine to function correctly every time. It is also a way to ensure that your microdermabrasion machine is clean when you use it.
For the tips you use on the wand, you may also purchase a cleaner. Follow the instructions carefully on the user manual on how to clean or replace an item to make sure that your machine will function well in more treatment sessions that will follow.
If your machine has only one tip, consider buying other types. Most users say that it is best if you use the different types of tip, since your skin areas vary in tone, color and texture. Some are hard to reach, while some can be easily treated.
Smart usage means lasting, effective machines
Break free from the skin problems you are suffering from. Say goodbye to dull skin, acne, pimples, blackheads, whiteheads, and many more!
The new you is coming. Now is the time to know the right hacks in maximizing your own microdermabrasion machine.
While professional treatment sessions are perfectly fine, think about the hundreds of bucks you will be able to save if you own a microdermabrasion kit and do the treatment on your own.
One of the biggest values here is that you save more time. No more frequent visits to the clinic. No more hurrying to fit everything in your tight schedule. Talk about less hassle.
RECAP... HOW TO MAXIMIZE ANY MICRODERMABRASION KIT YOU BUY:
- Choosing the right setting or your microdermabrasion device
- Shower BEFORE exfoliation
- Perform the treatment 2 to 3 times a week
- Use your microdermabrasion machine along with other effective skincare products, and...
- Make sure to clean or replace items in your microdermabrasion kit when needed
It is also important to thoroughly read the reviews and product overview and description of the kit you’re planning to buy. This is so you can determine if you’re getting the right one.
Carefully follow the guidelines in the manual of the microdermabrasion kit you purchased, ask others’ advice, and you’re good to go. Get the skin you want now!